Saturday 27 November 2010

How To Make Tea House Doors, Part II

Take yourselves away from the snowy winter wonderland outside and just try to imagine for a few minutes that you are Himself, Master of Complexities! How would you build the tea house doors?

Would you:

A) Enthusiastically nail together any old random bits of almost matching sized pieces of wood you happened to have lying around that hadn't rotted yet to make some frames. Grab a few bits of tatty perpsex from an old disused coldframe up the garden, saw them roughly to size whilst making a vague stab at getting 90* angles, panel pin them into the frames hoping for a semblence of rigidity and crossing your fingers that all 8 panels will be more or less the same size and fit together reasonably well, taking, oooh, about half an hour per door? or



B) Write out a meticulous plan of action of how many of each piece of wood I needed, what the measurements were and what extra joints etc each piece needed, before cutting all the wood. Then carefully construct a production line of 8 complete frameworks of pre-planed interlocking pieces all previously cut to the predetermined sizes, with a range of slits, notches and complicated joints already in place. When making the panels, use polycarbonate that was cut to approximate size by the company as requested then trimmed to the exact size using a hand-made jig and taking the excess internal pieces out with a stanley knife, taking several weeks over the whole delicate precision process?


Yeahr, we'd have all gone for option A. Good job it was Himself doing the job then wasn't it?! :D


This is his jig to trim the polycarbonate.


The polycarbonate we (okay - HE) used is really designed for roofs and conservatories. It has two layers - similar to double glazing, for insulation (vital for me!) and is structured to make it strong. We didn't need the strength so, with hindsight, we should have gone for 2 thin sheets instead of 1 thick sheet. The pieces would have been cut accurately to size, Himself wouldn't have had to spend hours trimming off the insides and the entire process would have been a whole heap easier!
However, the co-efficient of thermal expansion of polycarbonate is 6 times that of wood, so you can't mount a big piece in a frame without having huge clearances (6mm per metre), which = lots of movement, which = lots of draughts, which =unhappy Nutty Gnome! (I didn't get the technical bit, but I understood the draughts!)
Here is a finished trimmed piece. The internal measurements had to be smaller to allow the panel to fit in the cross piece of the frame.


This is the Brio train track Himself constructed! Ooops, sorry - wrong again. It's one of the many cross pieces he made to slot the polycarbonate into.


Like so!



Several doors in various stages of assembly.


One door completed and being glued. This took ALL Himself's begged, stolen and borrowed clamp collection and made him very happy. He does love to use all his clamps! :)

You can see in this photo that the opaque polycarbonate has
stripes in it as it's slightly ridged. The stripes echo the paper shoji blinds in a traditional tea house.

The finished door!

Polycarbonate is much lighter than glass and makes handling and using the doors much easier.

Ceefer cat was on Quality Assurance that day!


As Himself got ready to try the first panel in position he realised that he'd not made any edging strip for the floor .......another 'it's all going horribly wrong' moment!


Delving deep into the dusty recesses of the garage, he found some old mahogany shelving from a hideous stone bookcase that I knocked out years ago -'never know when things might come in useful'! He cut nice complicated shapes in them to fit over the floor panels and frame .......

...and because no one piece was long enough, he also cut nice complicated joints to get the pieces to butt up together smoothly. The dark strip along the top is also slightly taller than the paler wood so that the panel can butt up against it.

He then borrowed the wonderful Pete's biscuit jointer (not the edible variety unfortunately) to make the top and bottom fixings for the 4 non-opening panels. That oval thing is the biscuit apparently!
Biscuits in place, joints at the ready.

First door panel finally in place - although only testing at this stage.

The 'ears' on the top and bottom of the door still have to be cut off.

The door is also the wrong way round - for my photo opportunity!


We kept the protective stuff on the panels so that we could easily see which was the outside and also to protect them when I painted the wood with the eco-preservative.

Himself screwing the door hinges in place.
Ooops, dropped a screw!


The hinges allow the doors to fold right back.

Then he had to make a piece of quandrant to fill the gap where the two panels meet - and to use his REALLY big clamps whilst the glue dried!

Checking from the inside.....

Looking down the garden towards the house. The stream is just visible to the left of the rocks on the island.
A little bit of precautionary bracing until Himself was convinced that the quadrant wasn't going to ping off! Can't be too careful!


Then the whole lot had to be covered in blue tarp until I'd got time between growing vegetables and digging pond extensions (more of that later!) to paint all the doors and panels with the eco-preservative.

The grand unveiling....TA-DHAH!



It's even got proper lights in there now.

How it looks at the moment!

and Baaaarney in the snow!

I think Himself is making a fantastic job of the tea house. He thinks you should never do a job the first time as it's always better the second time. Does that mean I get another tea house?!!!
1st December. Quick update on Baaaarney!

21 comments:

Liz said...

Hi Liz,

No I believe it means Himself is offering to make a trip to Sheffield and build me a tea house! :)

Lovely to see it (almost??) finished! Have you actually done the sealing and such and actively using it? Although probably not in the snow I would imagine...

Jindivick Wildlife Care said...

You do know how lucky you are to have such a fussy, finicky handyman don't you?
I on the other hand have a handyman who completely extols the virtues of fencing wire and baling twine to "fix" things. You are a lucky woman - that is a gorgeous outlook you have from your doors!

nilla|utanpunkt said...

Hi Nutty! Here I am again, been away for such a long time. Just thought about you and your Japanese marvel project. And popped in (Oh, I LOVE your new header image!), and am ever so impresse, it's all coming together! It's looking BEAUTIFUL and himself is a star. Gobsmacking!

Phoenix C. said...

Lucky you! Looks like a fantastic tea house!

Looking at your lovely post on Whitby again, it's a good job you're not travelling there at the moment, as all the roads seem to be closed! The snow is immense up here.

Pondside said...

It is looking so beautiful - we'll all want one!
Himself and The Great Dane would be dangerous, left on their own with a pile of old wood and fixings. Who knows what they'd come up with!?

Nutty Gnome said...

Hi Liz - you do realise that it's taken 3 years so far don't you?!

It's almost sealed up and part of the internal bording out has been done, but it's not useable yet - in fact I can only just get to it by wading through thigh-deep snow at the moment! :)

Hi Gemma, nice to see you again. I do know how lucky I am to have Himself - especially as I am an expert with bits of wire, string and weird and wonderful knots!

The Idiot said...

Proper job.

You know something, I reckon he could get a pool table in there!

Nutty Gnome said...

Hi Nilla, nice to see you again. I'm glad you like everything - and you're right, it IS beautiful and Himself is truely wonderful. I am one lucky woman! :)

Hi Ingrid - the tea house is a work of art and a labour of love!
Yes, I think Whitby and up where you are have had it worse than us - and we'd got 21 inches of snow this afternoon! Take care out there - or, better still, stay in for a few days! :)

Nutty Gnome said...

Hi Pondside - thank you! I think Himself and The Great Dane would make an amazing combo .....I'm just not quite sure what they'd come up with between them :)

Hi IG- aye, 'tis indeed a proper job, but there's no pool table going anywhere near it!!!

Liz said...

Hi Liz,

3 years you say? Why, that's quite fast building... ha ha.

Ok, perhaps I won't have one then, I plan on moving house in the next year or so anyway, perhaps I'll find a house with one already?? Wishful thinking???

xiao said...

ecorating with a different gem accessory, shimmer, no minus than the form.To assemble the recent female's liking, this reduction and coldn thomas sabo jewellery ess, largely to clothes and more to show the women's boundary of the charm. In detail, many international brands of rage designers have i thomas sabo price ncisive out that the objects on each shape studs sequence. Series includes four different themes of form

Shady Gardener said...

Oh! Oh! Would he make a trip to the USA (Iowa - my backyard??) ;-)

You made me laugh. With your first two options, it was Very Apparent as to which Himself would pick! And I KNOW you're glad about that. Your tea house is looking fabulous. I wonder who you will first serve tea there? (Besides Himself!)

Happy December, Liz!

Nutty Gnome said...

Hi Liz - a house in Sheffield with a pre-existing tea house in the garden? Hmmm?.....no chance!!!
A house with a bigger garden where you can build your own - yep! :)

Hi Xiao and thank you for that - I shall take a look.

Nutty Gnome said...

Hi Shady - ooh, a visit to Iowa is a very tempting prospect.....of course I'd have to come as the official English/American translator!;D

Himself wil be the very person I serve tea to in my tea house but after that it'll be open to all visitors - book your place now! :)

Gordon Mason said...

I'd have been Option A, without a doubt. This may explain why we don't have a teahouse!

D said...

What a masterpiece! Himself must be quite proud as are you. Simply lovely.

Catherine@AGardenerinProgress said...

Wow, it looks great! I missed this post, but saw the teahouse in your Narnia post and knew I missed something. I love how it looks with the lights on, so inviting.

Rob (ourfrenchgarden) said...

Spot on!

I need a biscuit jointer. How many clamps does a person need in their life?

That's a well built bit of kit. Not a corner cut, if you see what I mean.

Nutty Gnome said...

Hi Woody - I'm nearer an Option A too , which is why Himself built the tea house!

Hi Catherine - it does look lovely and I can't wait for the inside to be finished (once it warms up a bit!) so that I can get on and use it as my treatment room :)

Hi Rob. According to Himself a man can NEVER have too many clamps! Actually most of those are borrowed from various male friends - but he got quite das when he had to give them back!

He has done an amazing job on building it - if there's ever an earthquake in Chesterfield, the tea house will still be standing!

meemsnyc said...

oh WOW! This tea house is just gorgeous!

Nutty Gnome said...

Hi Meemsnyc. I'm glad you like it! Himself has put HOURS/MONTHS of work into building it for me and it is truely wonderful! I can't wait to be able to use it as my holistic therapies treatment room at last!